Saturday, 30 November 2013

How can I protect myself while online?


Computer security



Question

How can I protect myself while online?

 Answer


Verify data is encrypted


When sending confidential information over the Internet such as usernames, passwords, or credit card numbers only send it securely. To verify this look for a small lock (Internet browser security lock) in the bottom right corner of your browser window or next to the address bar (as shown below). If visible, this lock should also be in the locked position and not unlocked.

Internet Explorer 7.0 secure address bar
Internet Explorer 7 secure address bar

We also suggest making sure the URL begins with https as shown above.

While the lock is in the lock position, data is encrypted, which helps anyone from understanding the data if it's intercepted. 
When no lock is visible or in the unlocked position all information is plaintext and if intercepted could be read. If a webpage is not secure, such as an online forum, use a password you wouldn't use with protected sites such as your online banking website.

E-mail is not encrypted

 

Websites should not transmit confidential data over e-mail, such as passwords, credit card information, etc. E-mail is not encrypted and if intercepted by a third-party could be read.

Be aware of phishing scams


Familiarized yourself with phishing scams and techniques, which are used to trick you into divulging your account information. Online banking sites, Paypal, EBay, Amazon, and other popular sites that require logins are popular targets.


Use a safe password

 

Websites that store confidential data, such as an online bank site need to use strong passwords. Also, it is highly recommended that you use a different password for each website that requires a login. If you need help remembering your passwords consider using a password manager.

Use caution when accepting or agreeing to prompts

When prompted to install any program or add-on make sure to read and understand the agreement before clicking on the Ok button. If you do not understand the agreement or feel it is not necessary to install the program cancel or close the window.

Additionally, when installing any program watch for any check box that asks if it's ok to install a third-party program, toolbar, etc. These are never required and often cause more issues than good. Leave these boxes unchecked.

 

Be cautious where you're logging in from

Business


Your place of work can install key loggers or use other methods of monitoring the computer while online. Someone who has access to this information could read these logs and gather usernames and passwords. Also, do not store any passwords in your browser if your computer is shared with other coworkers.

Wireless network

 

When on a wireless network realize that all information being sent to and from your computer can be intercepted and read by someone nearby. Prevent this from happening by only logging into a secure network using WEP or WPA. If this is a home wireless network, make sure it is secure.

Friends house


Be concerned when logging into an account from a friends computer. A computer or network you are not familiar with could intentionally or unintentionally log usernames and passwords. Finally, when logging into any site on a friends computer never save the password information on their browser.

 

Be aware of those around you

While at work, school, library, or anywhere that has people around who could look at the monitor be cautious of anyone shoulder surfing. Someone could watch you type in your password, which would give them access to your account.

If you need everything displayed on the screen to remain private, consider a privacy filter for the display.

Update Internet browser plugins

Often many attackers find security vulnerabilities through browser plugins such as Adobe Flash. Make sure all installed Internet plug-ins are up-to-date.

 

Secure saved passwords

Make sure to store passwords and login information in a secure area. Never write login information on a sticky note or in a text file that is not encrypted.

To save your passwords we recommend using a password manager, which stores all login information and securely encrypts and password protects that information.

When saving password information in a browser, it may be visible by anyone who has access to your Internet browser. For example, without a master password setup in Firefox anyone can see all stored passwords.

 

Use a third-party service to confirm the safety and security of a page

We recommend the free Web of Trust (WOT) tool to verify the safety of all websites on the Internet.


Tuesday, 10 September 2013

How to Remove Autorun Virus from Hard Disk Drives


Steps


Method 1

  1. 1
    Open command prompt. Go to Windows, then Run, and type "cmd" . Press enter.

  2. 2
    Type "cd\" and press enter to get to the root directory of c:\ .

  3. 3
    Type "attrib -h -r -s autorun.inf" and press enter.

  4. 4
    Type "del autorun.inf" and press enter.

  5. 5
    Repeat the same process with other drives, type "d:" and do the same thing. Then next "e:" and restart your computer.

  6. 6
    Restart your computer and it's done. Enjoy the freedom to open hard drives on a double click.


Method 2

  1. 1
    Go to any folder.In that on the top menu go to Tools--> Folder Options, which will be beside File, Edit, View, Favourites.

  2. 2
    A window pops up after you click on folder options.In that window go to View tab and select the option Show hidden files and folders.Now uncheck the option Hide protected Operating system files. Click "OK".

  3. 3
    Now Open your drives (By right click and select Explore. Don't double click!) Delete autorun.inf and MS32DLL.dll.vbs or MS32DLL.dll (use Shift+Delete as it deletes files forever.) in all drives include Handy Drive and Floppy disk.

  4. 4
    Open folder C:\WINDOWS to delete MS32DLL.dll.vbs or MS32DLL.dll (Use Shift+Delete )

  5. 5
    Go to start --> Run --> Regedit and the Registry editor will open

  6. 6
    Now navigate in the left pane as follows: HKEY_LOCAL_MACHINE --> Software --> Microsoft --> Windows --> Current Version --> Run .Now delete the entry MS32DLL (Use Delete key on keyboard)

  7. 7
    Go to HKEY_CURRENT_USER --> Software --> Microsoft --> Internet Explorer --> Main and delete the entry Window Title “Hacked by Godzilla”

  8. 8
    Now open the group policy editor by typing gpedit.msc in Start --> run and pressing enter.

  9. 9
    Go to User Configuration --> Administrative Templates --> System . Double Click on entry Turn Off Autoplay then Turn Off Autoplay Properties will display.Do as follows:

    • Select Enabled
    • Select All drives
    • Click OK
  10. 10
    Now go to start --> Run and type msconfig there and press Enter.A system configuration utility dialogue will open.

  11. 11
    Go to startup tab in it and uncheck MS32DLL .Now click Ok and when the system configuration utility asks for restart ,click on exit without restart.

  12. 12
    Now go to Tools --> Folder Options on the top menu of some folder again and select the Do not show Hidden files and check Hide operating system files.

  13. 13
    Go to your recyclable bin and empty it to prevent any possibility of MS322DLL.dll.vbs lying there.

  14. 14
    Now restart your PC once and you can now open your hard disk drives by double clicking on them

Saturday, 6 April 2013

How to Use Pen Drive As RAM in windows 7


How to Use Pen Drive As RAM

Now a days many programs take lots memory during operation, which is a nightmare for low RAM systems. So to avoid this make your pen drive/USB of large size as RAM, which will make your system faster. To know how to do this, follow below steps.


 Steps

  1. 1
    Insert your pen-drive. Let your PC read it.(Minimum 2 GB)

     
  2. 2
    Right click on My Computer.

    • Click on Properties from context menu.

  3. 3
    Click on Advanced tab.

  4. 4
    Click on Settings under Performance.

  5. 5
    Click on Advanced tab.

  6. 6
    Click on Change button under Virtual memory.

  7. 7
    Select your USB drive.

  8. 8
    Click on custom size radio button and give the values as follows;

    • Initial Size:1020
    • Maximum size:1020
    • The size depends upon your free memory capacity of your pen drive. So you can change this limit according to your pen drive size.
  9. 9
    Click on Set button, then click on OK.

  10. 10
    Now you have to restart the computer with pen-drive inserted. The speed of your computer will be increased.




  • You must be logged in as Administer to do this task.

 Warnings

  • Do not remove the USB. It'll crash your system.

Monday, 11 June 2012

install windows 7 from USB

How To: Install Windows 7 Or Windows 8 From USB Drive [Detailed 100% Working Guide]



This guide works 100% for Windows 7 and Windows 8 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide to install Windows 7 and Windows 8 from USB flash drive.
Bootable USB drive
I just did this method on one of my friends machine and installed Windows 7 and Windows 8 . The main advantage is that by using USB drive you will be able to install Windows 7 or Windows 8 in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.
The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.
Requirements:
*USB Flash Drive (Minimum 4GB)
*Windows 7 or Windows 8 installation files.
Follow the below steps to create bootable Windows 7/Windows 8 USB drive using which you can install Windows 7 or Windows 8 easily.
Procedure:
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Bootable USB Drive
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
Bootable USB Drive
5. Next insert your Windows7/Windows 8 DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
14
Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
8. Copy your Windows 7 or Windows 8 DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7 or Windows 8. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.
Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

Saturday, 9 June 2012

FREE MISSED CALL ALERT TRICKS 100% WORKING..

airtel
for airtel just type offer and send 54321.its 100% working tested by me.
reliance
Reliance miss call alert is free follow this go to setting > call divert > divert when out of reach > +919025000700 > done.100% working
aircel
Hi missed call alert is a great facility!but aircel and all networks charge us for using that.so now we have a trick to activate free missed call alert by sms to our mobile phone without any charge.
so aircel users to activate this free missed call alert trick dial the following number and your call will be diverted if you are not available or switched off.
Just Dial *62*+919842201006# and your missed call alert will be activated free of cost.after that you will receive an sms each time you miss a call.
today i came with A dhamaka Trick use it Fast Before it Block By Service Providers…..
Free Missed Call Alert Service For AIRTEL,BSNL and VODAFONE….
Here is the Trick…..
For BSNL
*62*17010#
For VODAFONE
*62*9155705#
for tata docomo
Free missed call Alert forTATA Docomo just type SUB and send it to 52244 (toll free)
for idea
this trick is working some place
which is given below
kerala dial-*62*9847926340#
delhi dial-*62*9891004748#
maharastra dial-*62*9822001711#
about missed call alert
every wants to use many services free.i have a gud news about those pepoles.they can save money for using this tricks.they have to follow this tricks and they will use missed call alert free of cost by using this tricks..

Thursday, 9 February 2012

Way to connect 2 pcs ...

     In this tutorial we see how to connect to computers together to share files and resources. We can go about it either the wired way or the wireless one. But the wireless way is pretty expensive. So in this tut, we consider the wired way.
To do it the wired way, we need either 2 normal ethernet cables and a Hub / Switch. OR a crossover ethernet cable. We choose the 2nd way as it is more cost effective.
To create a LAN network using a crossover cable, we just need a crossover (Cross crimped RJ45 / CAT5) cable and a LAN (Ethernet) card in both computers. Most computer motherboards have onboard ethernet these days.
We refer to the 2 computers as PC1 and PC2.
First of all, we connect the cross crimped ethernet cable in the LAN RJ45 ports of both the computers.
Now we start with configuring the computers.

PC1:

1. Just right-click “My Computer” and click Properties.
2. Select the “Computer Name” tab and click the “Change” button.
3. Change the computer name to whatever you want, here we name it PC1. Change the workgroup to WG. (The workgroup name should be the same in both computers)
4. Click OK.
Now, to configure the TCP/IP connection settings,
1. Goto “Control Panel” >> “Network connections”
2. Right-click on your LAN connection and click “Properties”. In the “General” tab, select “Internet Protocol (TCP/IP)”. Click the “Properties” button.
3. Set the Values
IP Address – 192.168.0.1
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.2
4. Click OK and you are done for PC1.

PC2:

1. Just right-click “My Computer” and click Properties.
2. Select the “Computer Name” tab and click the “Change” button.
3. Change the computer name to PC2. Change the workgroup to WG. (The workgroup name should be the same in both computers)
4. Click OK.
Now, to configure the TCP/IP connection settings,
1. Goto “Control Panel” >> “Network connections”
2. Right-click on your LAN connection and click “Properties”. In the “General” tab, select “Internet Protocol (TCP/IP)”. Click the “Properties” button.
3. Set the Values
IP Address – 192.168.0.2
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.0.1
4. Click OK and you are done for PC2 as well.

If you have done the above part correctly, the computers will have detected each other. If they don’t, just restart both the computers.
You can access the other computer in “My network Places”. You can also play multi-player games using this connection. For easier access you can map a drive on the network to a local drive by “Tools” >> “Map network drive”.

How to get hidden themes in Windows 7 ?

Hello Friends.Today I am telling you some hidden files of windows 7.Many of us don`t know windows7 having some hidden themes in C directory or where window is installed.You don`t need to download these themes . Follows these steps and get themes. STEPS: 1. First Go to Folder option and active show hidden files. Copy this address and paste in address bar of window C:\Windows\Globalization\MCT 2.Don`t navigate this address because this folder has been hide. You will five sub folder in this folder. 3.open one by one and at theme folder click on theme so you will get that theme. Done! I hope this is useful for you. Keep visiting.